Safety must be the prime concern while working with electricity. Even though, household electrical repairs are simple and upfront, each time take caution and good judgment when working with electrical wiring or devices. Common sense and quick decision can avoid accidents. -Safety tips for wiring electricity- Fundamental principle of electrical safety is:
Every time turn off power to the area or device you are working on.
At the main electric panel, take out the fuse or shut off the circuit breaker that reins the route of circuitry you are repairing.
Then check to make sure the power is off by testing for power with a voltage tester.
You should be in good health and mental position while doing electric work.
See more tips on this website:
Tips to deal with frustration and anger
Tip: Check a live circuit with the voltage tester to confirm that it is working before you trust on it. Reestablish power only when the repair or replacement project is complete. Keep an eye on the safety tips as detailed below. Repair and work on only those electrical items for which you are skilled.
Eleven Safety tips for wiring electricity
Turn off power the main electric service panel or the main fuse box before beginning any work
Build a circuit catalogue and fix it to the inside of the door to your main electric service panel. regularly update it.
Make sure that power is OFF by testing at the channel, switch, or fixture with a voltage tester.
Take only UL-approved electrical parts or devices. These strategies have been tested for safety by standard Laboratories.
Use rubber-soled shoes while working with electrical wiring. On humid floors, use a rubber mat or dry wooden boards.
Take fiberglass or wood ladders while repairing household near the service pole.
Breakers and fuses must be harmonious with the panel producer and match the circuit volume.
By no means alter the points of a plug to fit a receptacle. For this, install a new grounded receptacle.
Do not penetrate walls or ceilings without first shutting off electrical power to the circuits that may be hidden.
Bonding is a very important safety system. A person could receive a fatal shock if he or she touches energized metal that is improperly bonded, because that person becomes electricity’s return path to its source. Bonding is also a fire safety system that reduces the chance of electrical fires.
Smoke and carbon monoxide (CO) alarms are an essential safety component of any living facility.
Extras
GROUND-FAULT CIRCUIT-INTERRUPTERS A GFCI is an important safety device that disconnects a circuit in the event of a ground fault (when current takes a path other than the neutral back to the panel).
Never touch any parts inside a circuit breaker panel until you have checked for power. Circuit breaker panels differ in appearance, depending on the manufacturer. Never begin work in a circuit breaker panel until you understand its layout and can identify the parts.